+
  • 71kX7-MfGjL.jpg
  • 71u6ZGFGTrL.jpg
  • 81atPRvVfhL.jpg
  • 81MTx_HEJ1L.jpg
  • 91pEVLZ21UL.jpg
  • 71cBUTcs4lL.jpg

JH-Mech Heavy Duty Compatible Starlink V2 Mounting Kit Outdoor TV Adjustable Carbon Steel Starlink Mount Pole

Precise Design The starlink roof mounting kit have a special square card slot which can perfectly fit to your starlink V2 internet kit satellite,which is made of high-quality metal material and able to withstand greater weight, making Starlink mount installation more stable and convenient.

Classification:

Antenna Pole

Keywords:


Hotline:

Description

Product Description
 
JH-Mech Heavy Duty Compatible Starlink V2 Mounting Kit Outdoor TV Adjustable Carbon Steel Starlink Mount Pole
 
 
Feature:
 
◆ Easy to assemble, place the starlink into the round bracket, and fix the four screws. According to your pipe diameter adjust the
U bracket and tighten the nut to secure the clamp to the pole.
◆ Durable material, 2mm carbon steel made the sheet and galvanizing process ensure long work time, durable construct enough to support the Starlink antenna.
◆ Flexible Installation, the U-brackets can be installed in two directions, vertical and horizontal, they can be used for RV and
are more flexible to use in different scenes.
Detailed Images
 
 
 
 
 
* Optimal Design
 
Our roof mount has made the following improvements:
1. After installing the base, rectangular dish can be installed without any tools, ensuring precise matching! 2. The base and adjustment rod are designed with bolt locking, avoiding irreversible damage to the starlink product caused by squeezing the adjustment rod during the stabilization process.
 

 

* Heavy-duty Steel Material
Made of high-quality carbon steel, which is tight and not easy to deform, moisture-proof and not easy to rust. Even in strong wind, rain, and snow weather, it can ensure stability and strong load-bearing capacity. It provides the best security for starlink internet kit satellites.

 

Made of 3mm Heavy Duty carbon steel, which is tight and not easy to deform, moisture-proof and not easy to rust.
More importantly, your Starlink equipment will not be damaged in order to enhance stability.
Even in strong wind, rain, and snow weather, it can ensure stability and strong load-bearing capacity.
 
 
 
* Widely Applicability
 
The U-shaped screw has a broad adjustment range, providing this pole adapter mouting kit with high adaptability. It can be applied to pole diameters ranging from φ20mm to 52mm (0.8 in-2 in). Prior to purchasing, please measurethe diameter of the pole where you intend to install Starlink and ensure that it fits within this specified range.
 
* Sturdy Performance
The starlink mount is made of high strength carbon steel which has long lasting durability.The mounting kit for starlink, weighing 1.5 Kg, is also very reliable in strong winds, preventing accidental sliding or loosening, and ensuring safety in inclement weather. The starlink wall mount adopts electrophoresis process, which has the performance of anti-corrosion and anti-rust, and will not rust when used outdoors for a long time to avoid corrosion of the equipment.
For installation, get your tools ready and proceed as follows:

1. Select the mounting location
2. Get your mounting hardware- wooden surfaces; use wood lag screws or other fasteners to suit your material.
3. Lay out the J-mount on the surface, and mark the holes
4. Drill pilot holes if you will be using any lag screws
5. Secure your mount with the lag screws
6. Align the mast and use a level to check its position
7. Tighten the angle adjustment nuts in the configuration suitable to your area
8. Once the j-mount is fully fastened on the surface, slide your Starlink dish, taking care to avoid damaging the cable
9. Now, plug in Starlink and give it time to boot up

Product message


Product name:

Submit