+
  • Starlink Mounting Kit (4)(1712105146428).jpg
  • Starlink Mounting Kit (5)(1712105146459).jpg
  • Starlink Mounting Kit (6).jpg
  • Starlink Mounting Kit (7).jpg
  • Starlink Mounting Kit (1)(1712105146425).jpg
  • Starlink Mounting Kit (2)(1712105146413).jpg
  • Starlink Mounting Kit (3)(1712105146433).jpg

JH-Mech High Performance Wall Mount Antenna Bracket Windproof TV Y Shape Adjustable Steel Starlink Mounting Kit

* If you need to mount a large mast and antenna, this is antenna mast brackets you want to get. It's seriously heavy duty and will last forever. This antenna wall mount could support a long mast with a large antenna on top.

Classification:

Antenna Pole

Keywords:


Hotline:

Description

Product Description
 
JH-Mech High Performance Wall Mount Antenna Bracket Windproof TV Y Shape Adjustable Steel Starlink Mounting Kit
 
* The metal of the antenna mount bracket is iron that is coated with zinc to protect it from rust and corrosion for outdoor installation which are very heavy and well-formed.
 
 
* Heavy-duty stand off wall mast mount clamps are made of 0.2 inch iron that is strong enough to bear heavy antenna masts. Theiron bars were very heavy and well-formed. With these mounts the attached antenna is absolutely stable with no sway.
Specification
Product Name
JH-Mech High Performance Wall Mount Antenna Bracket Windproof TV Y Shape Adjustable Steel Starlink Mounting Kit
Surface Finish
Powder Coating, Anodized and Lightly Brushed
Color
Black (or customized)
Application
Outdoor
Product type
Metal Poles
Raw material
Carbon steel,Alloy Steel, Aluminum,Stainless steel
OEM
Availabe
Detailed Images
 
* If you need to mount a large mast and antenna, this is antenna mast brackets you want to get. It's seriously heavy duty and
will last forever. This antenna wall mount could support a long mast with a large antenna on top.
 
* The Antenna Wall Mount is easy to install. Setup is pretty easy for wood siding with lag bolts. It also comes with expansion bolts for concrete. You will get a 3-legged mount, plus a 2-legged mount (same gauge hardware as the three-legged). And note that the 3-legged one at the bottom.

* Kit includes: 1 pair(2-leg and 3-leg mount braces), including U-Bolt ,V-Block Brackets ,M8*60mm expansion bolts and lag bolts for reliable mount.

* Perfect Size
 
The antenna mount is 17 * 5 * 4 inch, which is the right size. This 17-inch arm has the necessary mast mount and cable routing for use with the Starlink dish, and it's one of the easier-to-install mounts. It is good for: Eave/fascia, or exterior wall.
 
* Sturdy Performance
The starlink mount is made of high strength alloy which has long lasting durability.The mounting kit for starlink, weighing 1.5 Kg, is also very reliable in strong winds, preventing accidental sliding or loosening, and ensuring
safety in inclement weather. The starlink wall mount adopts electrophoresis process, which has the performance of anti-corrosion and anti-rust, and will not rust when used outdoors for a long time to avoid corrosion of the equipment.
For installation, get your tools ready and proceed as follows:

1. Select the mounting location
2. Get your mounting hardware- wooden surfaces; use wood lag screws or other fasteners to suit your material.
3. Lay out the J-mount on the surface, and mark the holes
4. Drill pilot holes if you will be using any lag screws
5. Secure your mount with the lag screws
6. Align the mast and use a level to check its position
7. Tighten the angle adjustment nuts in the configuration suitable to your area
8. Once the j-mount is fully fastened on the surface, slide your Starlink dish, taking care to avoid damaging the cable
9. Now, plug in Starlink and give it time to boot up

Product message


Product name:

Submit