Easy Installation A-Frame Swing Brackets


Release time:


DIY Swing Sets for Kits with Easy Installation Bracket.

Industrial built high quality swingset hanger - The perfect swing set brackets for all swing set products indoors or outdoors including gymnastics rings ceiling mounts, porch swings, and yoga trapeze swings. Great for kid's outdoor jungle gym sets.



Following content includes three aspects.

1. Specification of Floating Bookshelf Bracket.

2. More Model of Swing Bracket.

3. Installation.



1. Specification of Swing Bracket.



Swing Bracket


1.5mm Thickness Steel


Green Powder Coating




7*6*5 Inch


Screws and Single Box














Making A Seriously Sturdy A-frame in the Easiest Way---We recommend using one kiln-dried 4x6-114" top beam (with a true measurement of 3-1/2" x 5-1/2") and four kiln-dried 4x4-96" (with true measurements of 3-1/2" x 3-1/2") side support legs to construct a basic A-Frame which completed.


NOTE! The bracket openings measure 3-5/8" x 5-5/8" and 3-5/8" x 3-5/8". Make sure the length of 4x6 top beam is shorter than 114", the top beam may gonna to bend if it is longer than 114".


2. More Model of Swing Bracket


        Big A Frame                                       Half Frame                                   Small A Frame



3. Installation

Easy Install---First attach the swing set brackets to 4x6 top beam. Then simply slide the 4x4 legs into the brackets with the beam lying on the ground (top down).Pre-drill the holes for the lag screws and ratchet them down. Also you could add a 2x4 cross piece on the legs for added stability.


Feel free to contact us if you are interested. Also, customized designing is acceptable here.