The Folding Tire Rack is the ultimate tire storage solution, combining durability with flexibility. The unit folds up against the wall when not in use. It’s perfect for storing seasonal tires, RV tires, ATV tires and more. Its adjustable mounting width of 32" to 48" easily accommodates four standard vehicle tires. The Folding Tire Rack is lightweight, easily installed and available in a scratch-resistant silver powder-coated finish. It is made entirely of durable steel tubing and holds up to 300 lbs.
Product Information & Details
• Telescoping chrome tubes expands to allow for mounting widths from 32" to 48"
• Folds up against the wall and out of the way when not in use
• Can easily accommodate 4 or more standard size seasonal tires, RV tires, ATV tires and more
• Strong, durable steel construction
CLICK THE LINK TO SEND INQUIRY!
https://www.jh-mech.com/message.html
ASSEMBLY INSTRUCTIONS
1. Mounting the Upright Supports to the Wall Studs
A: Using a stud-finder, locate 2 wall studs that are 32" to 48" on center. Using a pencil, mark the top mounting hole centers. Make sure holes are level. Pre-drill the 2 marked holes using a 3/16 drill bit.
B: Mount the Vertical Tubes of the Left & Right Brackets (A&B) with Lag Screws (C), using a 1/2" nut driver or socket wrench, making sure holes are positioned as shown.
Do not fully tighten the top screws at this time.
Make sure that the Vertical Tubes of the Left & Right Brackets (A&B) are vertically level, then drill through the remaining 2 holes in each Bracket (A&B). Fasten with remaining Lag Screws (C) and fully tighten all of the Lag Screws (C).
2. Attach the Round Tubes
Insert the smaller diameter Round Tubes (E) into the larger diameter Round Tubes (D). Using a 9/16" nut driver or socket wrench, fasten them to the horizontal tubes of the Left & Right Brackets (A&B) with 3/8" x 2" Hex Bolts (F), in the position that best supports your tires.
3. Tighten, Adjust & Fold
Make sure that all Fasteners are fully tightened and if necessary, adjust tightness so that the unit folds easily for storage. Store the unit in a folded position by locking it closed with the side hooks, as shown.
Each unit can hold a maximum of 300 lbs (136 kg) when mounted directly to wall studs and the weight load is evenly distributed.
Verify all connections at least once per year in order to ensure that they are fastened securely.
If you have any question or inquiry on the folding rack, please feel free to contact me by following contact information.
