+
  • Antenna Adapter (7).jpg
  • Antenna Adapter (6).jpg
  • Antenna Adapter (1).jpg
  • Antenna Adapter (2).jpg
  • Antenna Adapter (3).jpg
  • Antenna Adapter (4).jpg
  • Antenna Adapter (5).jpg

JH-Mech High Quality Starlink Mounting Kit Rectangular Dish Internet Carbon Steel Starlink Antenna Adapter

Feature: ◆ Easy to assemble, place the starlink into the round bracket, and fix the four screws. According to your pipe diameter adjust the U bracket and tighten the nut to secure the clamp to the pole. ◆ Durable material, 2mm carbon steel made the sheet and galvanizing process ensure long work time, durable construct enough to support the Starlink antenna. ◆ Flexible Installation, the U-brackets can be installed in two directions, vertical and horizontal, they can be used for RV and are more flexible to use in different scenes.

Classification:

Antenna Pole

Keywords:


dh

Hotline:

Description

Product Description
 
JH-Mech High Quality Starlink Mounting Kit Rectangular Dish Internet Carbon Steel Starlink Antenna Adapter
 
 
Feature:
◆ Easy to assemble, place the starlink into the round bracket, and fix the four screws. According to your pipe diameter adjust the
U bracket and tighten the nut to secure the clamp to the pole.
◆ Durable material, 2mm carbon steel made the sheet and galvanizing process ensure long work time, durable construct enough to support the Starlink antenna.
◆ Flexible Installation, the U-brackets can be installed in two directions, vertical and horizontal, they can be used for RV and
are more flexible to use in different scenes.
 
Detailed Images
 
Specification:

Product Name: Double U brackets pipe clamp
Material: High-quality 2mm carbon steel
Color: Metallic
Surface: Galvanizing
Pole diameter range: 1.2-2 inches
Weight: 0.69 lbs
Package: clear plastic bag
 

 

* The Antenna Wall Mount is easy to install. Setup is pretty easy for wood siding with lag bolts. It also comes with expansion bolts for concrete. You will get a 3-legged mount, plus a 2-legged mount (same gauge hardware as the three-legged). And note that the 3-legged one at the bottom.

 

* Perfect Size
The antenna mount is 17 * 5 * 4 inch, which is the right size. This 17-inch arm has the necessary mast mount and cable routing for use with the Starlink dish, and it's one of the easier-to-install mounts. It is good for: Eave/fascia, or exterior wall.
 
 
* Widely Applicability
 
The U-shaped screw has a broad adjustment range, providing this pole adapter mouting kit with high adaptability. It can be applied to pole diameters ranging from φ20mm to 52mm (0.8 in-2 in). Prior to purchasing, please measurethe diameter of the pole where you intend to install Starlink and ensure that it fits within this specified range.
 
* Sturdy Performance
The starlink mount is made of high strength carbon steel which has long lasting durability.The mounting kit for starlink, weighing 1.5 Kg, is also very reliable in strong winds, preventing accidental sliding or loosening, and ensuring safety in inclement weather. The starlink wall mount adopts electrophoresis process, which has the performance of anti-corrosion and anti-rust, and will not rust when used outdoors for a long time to avoid corrosion of the equipment.
For installation, get your tools ready and proceed as follows:

1. Select the mounting location
2. Get your mounting hardware- wooden surfaces; use wood lag screws or other fasteners to suit your material.
3. Lay out the J-mount on the surface, and mark the holes
4. Drill pilot holes if you will be using any lag screws
5. Secure your mount with the lag screws
6. Align the mast and use a level to check its position
7. Tighten the angle adjustment nuts in the configuration suitable to your area
8. Once the j-mount is fully fastened on the surface, slide your Starlink dish, taking care to avoid damaging the cable
9. Now, plug in Starlink and give it time to boot up

Product message


Product name:

Submit